Active break.MOSFET CON FRENO ACTIVO. SOPORTA MUELLES HASTA M130 SIN RESTRICCIONES Y HASTA MUELLES M150 CON ROF BAJO.

- professionally designed and manufactured mosfet with motor active breaking (without wires) for airsoft electric guns (AEG)
- you can use max. 1,5qmm (AWG16) power wires and 0,25qmm (AWG24) signal wires
- Active break uses the excess energy from the motor to stop it. The braking effect is the most powerful with high torgue motor
- in weapons with very high rate of fire (ROF) Active break solves multiple shots in semi mode
- in semi fire mode piston isn't partially stretched, spring is fully released, parts in mechabox aren't under strain and nozzle locks hop-up chamber in greater part (depends on ROF)
- in auto fire mode piston stops in random position due the mechabox design. But this stopping is much faster with Active break
- Active break increases gun rate of fire and battery holds longer
- no sparking on switch contacts
- specified for common batteries: Ni-xx 8.4 - 12V, lipol 7.4 - 11.1V
- designed for spring M130 without restriction and maximum spring m150 with longer delay between shots and ROF 25bb/s. For higher load use extreme variant of this device
- easy to understand 6 wires connection
- device size 45x15x10mm
- in package is heat shrink over Active break and installation manual in English, which is in bookmark "MEDIA" online
WARNING: Installation of this device leave to expert, who could solder and disassemble airsoft gun. Never user soldering gun!